FlamLINE is the latest generation joint tape for bridging expansion joints in bituminous sealing between building components. The resistant joint tape made of high-quality elastomer offers safe and highly efficient installation and ensures impermeability at all joint zones at building transitions.
The two lateral adhesive flanges are reinforced with a support and are directly connected to the bituminous surface sealant by scorching. Depending on the installation scenario, they can also be force-fitted directly to the substrate using epoxy resin adhesive or liquid plastic.
Multi-dimensional joint movements are easily accommodated with the support-free expansion zone. This is positioned centrally above the expansion zone and forms the centre of the joint tape.
Different tape types are available depending on the expected joint movement.
Flexible part above the expansion joint
Absorption of cyclic (3D movements) up to 240 mm
The geometric course of the joint can be reproduced with a monolythic structure
No weak points at the connections due to vulcanisation
Heat-resistant over the long term
Remains flexible at very low temperatures
Reinforced flanges for integration into bituminous sealing systems by flame-scorching
Good resistance to a wide range of chemicals (e.g. chlorinated water)
Direct integration possible, e.g. with epoxy resin adhesive
Integration into other sealing systems (PMMA, polyurea) basically possible
+41 56 483 35 07
t.kozlowski@soba-inter.com